Application:

This cable is intended for use with submersible pumps and irrigation equipment. For wiring only between equipment located at water wellheads and motors of submersible pumps installed in deep wells.As connection cable for submersible electric motors (pumps) for the permanent use in potable water up to temperature of 70 °C and to a depth of 600 m. The cable is resistant to chlor- and sea water,liquid manor,moreover for use in dry, damp and wet rooms with medium mechanical load. Test certificates of different national and international institutes are available on request.

Construction

conductor material:bare copper wire IEC 60228/DIN VDE 0295
conductor construction:fine stranded, class 5
insulation:rubber EI7
sheathing material:rubber (CR) 5GM3

Technical Data

flame retardant: VDE 0482-332-1-2/IEC 60332-1
conductor maximum temperature at:90 °C
max. operating temperature,
fixed:-40 – +90 °C
temperature, moved/during installation:-40 – +90 °C
Submersible pump cable (-J)/ Submersible pump cable (-O)
nominal voltage Uo: 450 V 450 V
test voltage: 2,5 kV
core identification: colours acc. VDE 0293 (HD308)

Specifications

Conductor CSA mm	STRANDING No. of Strands/mm	NOMINAL DIAMETER mm	CURRENT RATING Amps	WEIGHT Kg/km
4 Core x 2.5mm	50/0.25 24/0.20	15	21	210
4 Core x 4mm	56/0.30 32/0.20	20	28	410
4 Core x 6mm	84/0.30 32/0.20	18.5	36	498
4 Core x 10mm	140/0.30 32/0.20	20.5	51	632
4 Core x 16mm	224/0.30 32/0.20	28	67	1095
4 Core x 6mm	84/0.30 32/0.20	21.5	36	731
4 Core x 10mm	140/0.30 32/0.20	25.5	51	917
4 Core x 16mm	224/0.30 32/0.20	29.5	67	1281

 

Enquiry Form:

*

*

3 + 4 = ? Please enter the answer to the sum & Click Submit to verify your registration.