Applications:
This product is used in ships,petrol platforms and offshore buildings for power,light and control systems,usually used for fixed installation in most areas and open deck in ships.Design to meet requirements for improved EMC screening properties.If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recommended.

Constructions:
1.Conductor
Stranded copper wire 1.0mm² to 10mm² Class 2
Stranded copper wire 16mm² to 240mm² Class 5(Flexible)
2.Insulation
Mica tape
XLPE
3.Bedding
Separate tape
4.Screen
Copper tape,covering 100%
5.Amore
Copper wire braided,covering 90%
5.Sheath
Thermoplastic Polyolefine(SHF1),On requesting Thermosetting Polyolefine(SHF2)
standard colour black, other colours on request.

Applied Standards:

Design	IEC 60092-353
Conductor	IEC 60228 Class 2,Class 5
Insulation	IEC 60092-351
Sheath	IEC 60092-359
Flame-retardant	IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A
Fire -resistant	IEC 60331-1 and IEC 60331-2
Halogen-free	IEC 60754 series
Smoke emission	IEC 61034 series
Transfer Impedance	IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m])

Service Conditions
1.Rated Voltage:AC 0,6/1kV (1,2kV)
DC 0,9/1,5kV (if voltage to earth does not exceed 0,9kV)
2.long time working temperature 90℃
3.Minimum recommended installation temperature -15 °C
Lowest operation temperature -40 °C
4.flexible cables for mobile devices,the other cables are fixed laying
cable bending radius while laying is as below

Cable Structure	Cable Outer Diameter	Minimum Bending Radius
Metal Braided Armored		6D
Non Armored	D≤25	4D
	D>25	6D

Certifications:
Our marine cable has been type approved by the following Classification Societies
DNV,BV,CCS,NK,ABS,LR,RS,RINA,GL

hisea marine cable certificates

Enquiry Form:

*

*

4 + 5 = ? Please enter the answer to the sum & Click Submit to verify your registration.