Application

The cables are suitable for fixed installation and flexible operation as power supply cables to motors, distribution boards etc. For underground mining applications, for tunnel building applications, for open cast mining applications, for use in quarries and similar applications.

NSSHOEU was developed for special requirements in open pit mines and underground mining. These flexible cables are used for very high mechanical load, in dry and damp areas, out doors, in explosion hazard areas and for power supply to motors and other mobile equipments in industry and building industry. The cable type covers the applications described in DIN VDE 0118-2 / DIN VDE 0168. Further requirements see DIN VDE 0298-3.In case of small conductor cross-sections and over three cores the earth conductor is here located concentrically between inner and outer sheath.

Constructions

Conductors: Annealed flexible copper, class 5

Insulation: EPR (Ethylene propylene rubber)

Core identification: Coloured cores with printed numbers

Bedding: EPR (Ethylene propylene rubber)

Screen: TCW (Tinned copper wires) Only 3 of the 6 cores are screened

Sheath/Jacket: PCP (Polychloroprene)

Standards Applied

DIN VDE0250 Part 812: Cables, wires and flexible cords for power installation: Rubber insulated cable NSSHOU, IEC60332: Tests on electric and optical fibre cables under fire conditions
IEC60811-2-1: Common test methods for insulating and sheathing materials of electric cables and optical cables. Part 2: methods specific to elastomeric compounds Section 1:ozone resistance, hot set and mineral oil immersion tests
VDE0473 Part811-2-1: Resistance to oil
VDE 0482 Part 332-1-2: Behaviour in case of fire
VDE0293: Identification of cores for cables and flexible cords used in power installations with voltage ratings up to 1000 V.
VDE0298 Part 4: Current carrying capacity

Specifications

Cores*Area	Approx.Outer Diameter(mm)	Approx.Weight(kg/km)
1*16	12.0	260
1*25	15.0	390
1*35	16.5	500
1*50	18.5	680
1*70	20.5	900
1*95	23.5	1150
1*120	26.0	1440
1*150	28.0	1750
1*185	32.0	2180
1*240	35.0	2790
3G1.5	13.5	200
3G2.5	15.0	260
4G1.5	14.5	230
4G2.5	17.5	360
4G4	20.0	470
4G6	21.5	580
4G10	26.0	950
4G16	32.0	1400
4G25	37.0	2000
4G35	40.5	2700
4G50	46.5	3700
5G1.5	15.5	280
5G2.5	18.5	420
5G4	21.0	550
5G6	24.5	740
5G10	28.0	1100
5G16	32.0	1720
7G2.5	20.0	600
12G2.5	26.0	860
18G2.5	31.0	1240

 

Any other spec,please contact for more information.

Enquiry Form:

*

*

1 + 9 = ? Please enter the answer to the sum & Click Submit to verify your registration.